Commercial
New Construction / Additions / Alterations
Requirements for Applying for a Permit:
- Commercial Building Permit Application Checklist (PDF)
- Completed Commercial Building Permit Application (PDF)
- Detailed Scaled Site Plan
- Site Plan Requirements Checklist (PDF)
- Must be on 11" x 17" paper
- Scale must be 1" x 20' minimum and 1" x 200' maximum
- Structural Drawings - (2 sets, unless in FD3 in which 3 sets are required)
- 11" x 17" or larger drawings (preferably scaled at 1/4" per 1') to include:
- Foundation, Floor, Framing, and Roof Framing Plans
- Prescriptive braced wall line locations and calculations for both seismic and wind loads (site specific)
- Elevations - all four directions
- Structural Cross Sections and Details
- Truss Design
- 11" x 17" or larger drawings (preferably scaled at 1/4" per 1') to include:
- Structural Calculations stamped by Washington State Licensed Engineer and/or Architect (if applicable) - (2 sets, unless in FD3 in which 3 sets are required
- Design Criteria
- Stamped Clallam County Snow, Earthquake, and Wind Design Data Form (PDF)
- Washington State Energy Calculations
- Building Code Summary
- Means of Egress / Emergency Lighting Floor Plan
- Deferred Submittal Form (if applicable)
- Special Inspection Form (if applicable)
- Proof of Ownership (if applicable)
Additional Requirements to Obtain a Permit:
- Proof of Potable Water
- Current Septic System (if applicable)
- Proof of sewer connection (if applicable)
- 911 Address
- Road Approach Permit (if applicable)
- Drainage Plan
- If your site is near a water body or other critical area, special conditions may apply.
- Electrical permits are required and issued by the Washington State Department of Labor and Industries.
- When property is jointly owned or owned by others, letters from all owners must be submitted indicating project approval.
- If your lot has more than one road frontage, you must select a front yard for zoning setback purposes.
- Any parcel located in the Dungeness Water Rule area may require mitigation for use of a well.
Wireless Communication Facilities
Requirements for Applying for a Permit:
- Completed Wireless Communication Facility Application (PDF)
- Detailed Scaled Site Plan
- Site Plan Requirements Checklist (PDF)
- Must be on 11" x 17" paper
- Scale must be 1" x 20' minimum and 1" x 200' maximum
- Structural Drawings - 2 copies
- 11" x 17" or larger drawings (preferably scaled at 1/4" per 1') to include (if applicable):
- Equipment Building (if changes are being done to an existing building, if a new building is being added, or a building is being replaced)
- Tower and attachments
- Elevations - all four directions
- Structural Cross Sections and Details
- 11" x 17" or larger drawings (preferably scaled at 1/4" per 1') to include (if applicable):
- Structural Calculations stamped by Washington State Licensed Engineer and/or Architect (if applicable) - 2 copies
- Design Criteria
- Stamped Clallam County Snow, Earthquake, and Wind Design Data Form (PDF)
- Mount Analysis Report - 2 copies
- Special Inspection Form (if applicable)
- Proof of Ownership (if applicable)
Possible Additional Requirements to Obtain a Permit:
- 911 Address
- Road Approach Permit (if applicable)
- Drainage Plan
- If your site is near a water body or other critical area, special conditions may apply.
- Electrical permits, when required, are issued by the Washington State Department of Labor and Industries.
- When property is jointly owned or owned by others, letters from all owners must be submitted indicating project approval.